Operating Instructions General Settings Guide

Control Panel
15
1
14.
Main power indicator and On
indicator
The main power indicator lights when
the main power switch is turned on. The
On indicator lights when the operation
switch is on.
Important
Do not turn off the main power
switch while the On indicator is lit
or blinking. Doing so may damage
the memory.
15.
Operation switch
Press to turn the power on. The On indi-
cator lights. To turn the power off, press
again.
16.
Quick Dial keys
Press to select the registered destination
at a single touch, or to enter letters and
symbols.
17.
{On Line} key
Reference
Printer Reference 1
18.
Data In indicator
Reference
Printer Reference 1
19.
Copier function keys
Reference
Copy Reference
20.
{Lighter} and {Darker} keys
Press to change the image density setting.
Select the image density in five incre-
ments, lighter to darker.
21.
{Original Type} key
Press to select the original type registered
in 
[
Original Type 1 (Text)
]
 or 
[
Original Type 2
(Photo)
]
. When the original type is select-
ed, the corresponding indicator lights.
22.
{Cancel} key
Press to cancel an operation or return to
the previous display.
23.
{OK} key
Press to set a selected item or an entered
numeric value.
24.
Number keys
Press to enter numeric values.
25.
{#} key
Press to set a selected item or an entered
numeric value.
26.
{Start} key
Press to start copying, printing, scanning
or sending.

---

Getting Started
16
1
Display
The display panel shows machine status, error messages, and function menus.
Important
A force or impact of more than 30 N (about 3 kgf) will damage the display.
The copy display is set as the default screen when the machine is turned on.
When you select or specify an item on the display, it is highlighted like
.
Reading the Display and Using Keys
This section explains how to read the display and use the Selection keys.
1.
Selection keys
Correspond to items at the bottom line on
the display.
Example:
• When the instruction “press 
[
Dest.
]
”
appears in this manual, press the left
selection key.
• When the instruction “press 
[
User-
Code
]
” appears in this manual, press
the center selection key.
• When the instruction “press 
[
Reg.
No.
]
” appears in this manual, press the
right selection key.
2.
{Cancel} key
Press to cancel an operation or return to
the previous display.
3.
{OK} key
Press to set a selected item or an entered
numeric value.
4.
Scroll keys
Press to move the cursor in each direc-
tion, step by step.
When the {U}, {T}, {W}, or {V} key ap-
pears in this manual, press the scroll key
of the same direction.
***ZEN001.tif***
ABU103S
1
4
2
3
ABU103S.eps

---

Control Panel
17
1
Common key operations
The following keys are common to all screens:
Key list
[
Cancel
]
Deletes a selected function or entered values, and then the previous 
display returns. 
[
Exit
]
The previous display returns.
[
Stop
]
Stops a job in progress.
[
Yes
]
Acknowledges a selected function or an entered values.
[
Stop
]
Cancels a selected function or entered values, and then the previous 
display returns.

---

Getting Started
18
1

---

19
2. Combined Function
Operations
Changing Modes
Note
You cannot switch modes in any of the following situations:
• When scanning a fax message for transmission
• During immediate transmission
• When accessing User Tools
• During On hook dialing for fax transmission
• While scanning an original
The copying screen is displayed as default when the power is turned on. You
can change this default setting. See p.28 “Function Priority”.
ABU104S
ABU104S.eps

---

Combined Function Operations
20
2
-System Reset
The machine returns automatically to its initial condition when the job is fin-
ished, after a certain period of time has elapsed. This function is called “System
Reset”.
Note
You can change the System Reset time. See p.31 “System Auto Reset Timer”.

---