Operating Instructions General Settings Guide

11
1. Getting Started
Guide to Components
1.
Auto Document Feeder
Feeds in originals automatically.
2.
Exposure glass
Place originals face down here.
3.
Internal tray
Copied, printed paper, or fax messages
are delivered here.
4.
Ventilation holes
Prevent overheating. Do not obstruct
these by placing objects near them or
leaning things against them. If the ma-
chine overheats, a fault might occur.
5.
Main power switch
If the machine does not operate after
turning on the operation switch, check
the main power switch is turned on. If it
is off, turn it on.
6.
Main power indicator
Lights when the main power switch is
turned on, and goes off when the switch
is turned off.
7.
On indicator
Lights when the operation switch is
turned on, and goes off when the switch
is turned off.
ABU101S
ABU101S.eps

---

Getting Started
12
1
8.
Operation switch
Press to turn the power on (the On indi-
cator lights). To turn the power off, press
again (the On indicator goes off).
9.
Control panel
See p.14 “Control Panel”.
10.
Front cover
Open to access the inside of the machine.
11.
Paper tray (Tray 1)
Load paper here.
12.
Paper tray unit (Tray 2)
See p.13 “Other Items”.
13.
Internal tray guide
Open out to support large paper and
raise the end fence.
1.
Bypass tray
Use to copy onto OHP transparencies,
adhesive labels, translucent paper, enve-
lopes, and custom size paper.
2.
Right cover
Open this to remove jammed paper fed
from the paper tray.
3.
Lower right cover
Open this to remove jammed paper from
the paper tray unit.
ABU047S
ABU047S.eps

---

Other Items
13
1
Other Items
• External
1.
Paper tray unit (Tray 2)
Holds 500 sheets.
• Internal
A
Fax unit
Allows you to use the facsimile function.
B
Printer/Scanner unit
Allows you to use the printer and scanner functions.
C
Parallel port IEEE 1284 interface board
Allows you to connect an IEEE 1284 cable.
D
IEEE 1394 interface board
Allows you to connect an IEEE 1394 cable.
E
IEEE 802.11b wireless LAN board 
Allows you to install a wireless LAN interface.
F
Bluetooth Interface Board
Allows you to expand the interface.
G
PostScript3 module
Allows you to use PostScript3.
Note
You cannot install two or more of the options below: Parallel port IEEE
1284 interface board, IEEE 1394 interface board, IEEE 802.11b wireless
LAN board, Bluetooth unit.
ABU121S
ABU121S.eps

---

Getting Started
14
1
Control Panel
This illustration shows the control panel of the machine with fax, printer, and
scanner installed.
1.
Fax function keys
Reference
Facsimile Reference
and Facsimile Reference
Features>
2.
{Facsimile} key
Press to activate the facsimile function.
3.
Scanner/Fax function keys
Reference
Scanner Reference, Facsimile Refer-
ence  , and Facsimile
Reference
4.
{Scanner} key
Press to activate the scanner function.
5.
{Copy} key
Press to activate the copy function.
6.
{Printer} key
Press to activate the printer function.
7.
Indicators
Display errors and machine status.
h: Error indicator. See Network Guide
and see p.75 “x Clearing Misfeeds”.
B: Load Paper indicator. See Copy Refer-
ence.
D: Add Toner indicator. See Copy Refer-
ence.
8.
Display
Displays operation status and messages.
9.
Selection keys
Correspond to items on the display. Press
to select the corresponding item.
10.
Scroll keys
Press to select an item.
{U}: scroll upward
{T}: scroll downward
{V}: scroll right
{W}: scroll left
11.
{User Tools/Counter} key
• User  Tools
Press to change default or conditions
according to requirement. See p.26
“Accessing User Tools (System Set-
tings)”.
• Counter
Press to check or print the counter val-
ue. See p.81 “Other Functions”.
12.
{Clear Modes} key
Press to clear the current settings.
13.
{Clear/Stop} key
• Clear:
Clears an entered numeric value.
• Stop:
Stops a job in progress, such as scan-
ning, faxing, or printing.
ABU102S
7
2
5 6
4
3
8 
9
10
1112
13
14
15
25
21
19
18
20
22 23 24
26
17
16
1
ABU102S.eps

---