General maintenance

14

•  Press CENTER of D-Pad to save minutes setting

•  Press UP or DOWN to increase/decrease the 

  Game Timer seconds (00-59)

•  Press CENTER of D-Pad to save seconds setting

•  Press LEFT or Press CENTER of D-Pad to save settings and return to 

  SYSTEM Menu

Timer Alarm - An audible alarm sounds with 1 minute left and continuously 

after the timer has expired.

•  Press RIGHT or Press CENTER of D-Pad to change the setting from On or  

 OFF

•  Press UP or DOWN to cycle through ON or OFF (default is ON)

•  Press LEFT or Press CENTER of D-Pad to save the setting and return to  

  SYSTEM Menu

Trigger CMD - After holding the trigger for 1 second while the marker is Live, Trigger Com-

mand allows the marker to perform a function, either Force Shot, 

or Toggle the Eyes On or Off, or both.  A Force Shot is when the 

marker will cycle once with the Eyes ON even though there is no 

ball in the breech.  This is to allow sound activated loaders to be-

gin loading.  The Trigger Command may also be set to OFF which 

will not perform any function when the trigger is held for 1 second.

•  The screen displays the current setting of the Trigger Command

•  Press RIGHT or Press CENTER of D-Pad to change the Trigger  

  Command (either OFF, TOGGLE, FORCE or BOTH)

•  Press UP or DOWN to cycle through ON or OFF (default is  

 BOTH)

•  Press LEFT or Press CENTER of D-Pad to save setting and  

  return to SYSTEM menu

Dwell Lock - When selected ON, changing the Dwell Setting in 

any of the 3 user configurations (C1, C2, C3) will change the dwell for all 3 configurations. 

When OFF, the dwell in each user configuration can be changed independently.

•  The screen displays the current setting of either ON or OFF

•  Press RIGHT or Press CENTER of D-Pad to change the Dwell Lock setting (default is ON)

•  Press UP or DOWN to cycle through ON or OFF

•  Press LEFT or Press CENTER of D-Pad to save the setting and return to SYSTEM Menu

Brightness - Adjustable the brightness of the screen display when screen is not dimmed

•  The screen displays the current setting of the Brightness setting     

(A numerical 

value of 10%-100%, where 100% is the brightest   

 

 

setting)

•  Press RIGHT or Press CENTER of D-Pad to change the Bright 

  ness setting (default is 50%)

•  Press UP or DOWN to increase/decrease the Brightness setting  

 (10-100)

•  Press LEFT or Press CENTER of D-Pad to save the setting and  

  return to SYSTEM Menu

Dim Time - The elapsed time after the last joystick activation in 

which the screen will dim to save power.

•  The screen displays the current Dim Time setting (in seconds)

•  Press RIGHT or Press CENTER of D-Pad to change the Dim Time 

  setting (default is 10 sec)

•  Press UP or DOWN to increase/decrease the setting (5-60 sec, in 5 sec intervals)

•  Press LEFT or Press CENTER of D-Pad to save setting and return to SYSTEM menu

Auto Off – The elapsed time after the last trigger activation in which marker will shut off to 

save power.

•  The screen displays the current Auto Off setting (in minutes)

•  Press RIGHT or Press CENTER of D-Pad to change the Auto Off  

  time (default is 10 min)

•  Press UP or DOWN to increase/decrease the Auto Off setting  

  (5-60min, in 5 minute intervals)

•  Press LEFT or Press CENTER of D-Pad to save setting and  

  return to SYSTEM menu

Custom Boot – This setting allows the user to turn the use of the 

custom boot screen graphics on/off.  Custom boot screens can be 

made and downloaded using the Vanquish Boot Screen Editor and 

the Vanquish USB Tool software.  These applications are included 

with the Vanquish on disc manual.  

Note – if a custom boot screen has not been downloaded but the 

user turns it on the default boot screen will display.  The firmware version will not display 

---

15

when the custom boot screen is turned on.  

•  The screen displays whether the Custom Boot setting is On or Off

•  Press RIGHT or Press CENTER of D-Pad to change the Custom Boot setting (default is    

 OFF)

•  Press UP or DOWN to switch the setting to either ON or OFF

•  Press LEFT or Press CENTER of D-Pad to save setting and return to SYSTEM menu

Boot Time – This setting changes the amount of time the boot up splash screen is displayed 

when the marker is turned on. This time is adjustable from 0-5seconds with a setting of 0 not 

displaying the splash screen at all.  This setting applies to both the 

standard and custom boot screens.

•  The screen displays the current Boot Time setting (in seconds)

•  Press RIGHT or Press CENTER of D-Pad to change the Boot  

  Time setting (default is 3 sec)

•  Press UP or DOWN to increase/decrease the setting (0-5 sec)

•  Press LEFT or Press CENTER of D-Pad to save setting and  

  return to SYSTEM menu

PRES SIZE – There are two font size options for displaying the 

Regulator Pressure – Large or Small.

•  The screen displays whether the PRES SIZE setting is Large or  

 Small

•  Press RIGHT or Press CENTER of D-Pad to change the Pres Size 

setting    

 

(default is Small)

•  Press UP or DOWN to switch the setting to either SMALL or LARGE

•  Press LEFT or Press CENTER of D-Pad to save setting and return to SYSTEM   

 menu

System (SYS) Sound - Turns the system sounds ON or OFF, including the 

startup, shutdown, and enter/exit menu sounds.

•  The screen displays the current setting of either ON or OFF

•  Press RIGHT or Press CENTER of D-Pad to change the System Sound (default  

   is ON)

•  Press UP or DOWN to cycle through ON or OFF

•  Press LEFT or Press CENTER of D-Pad to save setting and return to SYSTEM   

 Menu 

JSTK Sounds - Joystick Sounds: Enables a beep when the joystick is activated 

when setting is ON.

•  The screen displays the current setting of either ON or OFF

•  Press RIGHT or Press CENTER of D-Pad to change the Joy 

 

  stick Sound setting (default is ON)

•  Press UP or DOWN to cycle through ON or OFF

•  Press LEFT or Press CENTER of D-Pad to save setting and return  

 

  to SYSTEM Menu

Lube Alert - This setting turns the Slick Assistant lube alerts ON or 

OFF.  The Slick Assistant lubrication monitoring system will alert 

the user if it is time to re-lube the marker.  This alert plays a sound 

and shows a special alert message on screen when the marker is 

turned on.  It also plays a sound if the Slick Assistant Lube Gauge is 

displayed during live mode.

•  The screen displays the current setting of either ON or OFF

•  Press RIGHT or Press CENTER of D-Pad to change the Lube Alert setting (default is ON)

•  Press UP or DOWN to cycle through ON or OFF

•  Press LEFT or Press CENTER of D-Pad to save setting and return to SYSTEM Menu

Reset Lube - This setting will reset the lube gauge.  This should be reset each time the marker 

is lubed.  Two choices reset or cancel

Training - When training mode is ON, while in Live Mode, instead of 

the marker cycling the solenoid, it will chirp quickly.  The eyes are 

bypassed.  This is for users to practice trigger activation without the 

need for an air source.  Note – the marker will not fire while training 

mode is on.  

•  Press RIGHT or Press CENTER of D-Pad to see if Training  Mode  

  setting is On or OFF

•  Press UP or DOWN to cycle through ON or OFF (default is OFF)

•  Press LEFT or Press CENTER of D-Pad to save setting and return  

  to SYSTEM Menu

---