10
precision electronic pressure transducer.
This shows the marker pressure as
regulated by the ASA/Regulator.
The pressure transducer has a range of
50-250psi. Out of this range,
pressure will not be displayed, and will
display LOW or OVER.
• Shot Counter – The marker will keep
track of the number of shots fired. This
number will increase each time
the solenoid is cycled and will be saved
even when power is disconnected. Shot
Counter can be reset in the settings
menu.
• AVG and Peak ROF’s Achieved - The Average ROF is the highest actual number of shots
that were started within 1 second. The Peak ROF is the shortest time between 2 consecu
tive shots. This can be reset by pressing the center on the joystick 2 times quickly
(Like double clicking a mouse).
• Lube Gauge - The Lube Gauge will monitor how many shots have occurred since last time
the maker was lubricated. This gauge must be reset by the user when the marker is lubed
for an accurate reading. There is also an alert associated with the Lube Gauge (see page
15 for Lube Alert).
• MAIN Menu – Press and hold CENTER on D-pad to enter the MAIN Menu (see below for
more details).
MAIN MENU
The display will show “MAIN MENU” at the top of the screen indicating the Main Menu.
Press the D-pad to the RIGHT, LEFT, UP or DOWN directions to scroll through the MAIN
Menu options. Press CENTER on the D-pad to make a selection.
• OFF – Turns Marker Off
• CONFIG – Enters User CONFIGurations Menu (see below)
• SYSTEM – Enters SYSTEM Settings Menu (see below)
• EXIT – Exits back to LIVE Mode
Note: MENU QUICK EXIT - As long as you
are not currently modifying a setting, you
can exit any menu at any time by pressing
and releasing the trigger. This will take you
back to LIVE Mode.
Note: Settings under this menu affect the markers firing characteristics and
may not be modified when tournament lock is on. Press the D-pad in the UP or
DOWN directions to scroll through the USER CONFIGURATIONS Menu options.
Press CENTER or RIGHT on the D-pad enter the selected option and see the
current setting.
User Configurations
There are 3 fully customizable user configurations (or profiles). The current user
CONFIG NUM (Profile) is displayed on the screen (1, 2, or 3).
• Only the settings under CONFIG menu are linked to a specific User Profile.
• If Tournament Lock is active, the marker will beep when trying to make a
selection and you cannot modify any settings in the CONFIG tmenu.
• Changing the values of a setting will only affect the Profile that is currently
chosen.
If the current Profile is 1, any changes to the user settings
in the CONFIG menu will
only affect Profile 1.
11
FIRE MODE - Choose between the different firing modes
• The current Firing Mode setting is displayed on the right side of the screen.
• Press CENTER or RIGHT to change the Fire Mode setting
• Press UP or DOWN to cycle through Firing Modes
• Press CENTER or LEFT to save your selection
• SEMI - Semi automatic firing shoots 1 shot per trigger pull up to the max ROF
(Rate of Fire) setting
• RAMP – Semi auto shots (equal to Ramp Shot Start setting), then a Ramping
rate of fire up to the max ROF setting (if Ramp Sustain Trigger Pulls
per Second is achieved, see below)
• BURST – Semi auto shots (equal to Ramp Shot Start setting), then multiple-
shot bursts at the max ROF. The number of shots in the burst is adjustable in
the BURST SHOT setting. If time between shots is longer than Ramp
Reset setting the marker goes back to Semi Automatic and the Ramp
Start shot counter is reset.
• AUTO - Semi auto shots (equal to Ramp Shot Start setting), then Fully Automatic firing
at the ROF CAP setting. If time between shots is longer than the Ramp Reset setting the
marker goes back to Semi Automatic and the Ramp Start shot counter is reset.
• PSP B - Complies to 2010-2012 PSP rules using Burst mode as described above
• PSP R - Complies to 2010-2012 PSP rules using Ramp mode as described above
• MILL - Complies to 2010-2012 Millennium Series Rules using Ramp mode as described
above
• NPPL – Complies with 2012 NPPL rules using Semi Auto mode as described above
ROF CAP - Choose between having the marker Rate of Fire Capped or Un-
capped. Turning this setting ON will cap the marker at the ROF (•) ON setting.
Turning this setting OFF will uncap the marker and allow the marker to fire as
fast as paintballs can be loaded and detected by the eyes.
Note - Firing modes other than Semi may not be uncapped due to ASTM Safety
Regulations.
• The screen displays the current setting of whether ROF CAP is On or OFF
• Press CENTER or RIGHT to change the ROF Cap setting
• Press UP or DOWN to cycle through ON or OFF
• Press LEFT or Press CENTER on D-Pad to save the setting and return to
CONFIG menu
ROF (•) ON- The maximum Rate of Fire with Eyes On (ROF Cap must be ON)
• The screen displays the current ROF EYES ON setting
• Press RIGHT or Press CENTER on D-Pad to change the ROF with EYES ON
setting
• Press UP or DOWN to increase/decrease the BPS setting (8.0-25.0 BPS, in
0.1 BPS increments)
• Press LEFT or Press CENTER on D-Pad to save setting and return to CONFIG
menu
ROF (•) OFF - The maximum Rate of Fire with Eyes OFF
• The screen displays the current ROF EYES OFF setting
• Press RIGHT or Press CENTER on D-Pad to change the ROF with
EYES OFF setting
• Press UP or DOWN to increase/decrease the BPS setting
(8.0-25.0 BPS, in 0.1 BPS increments)
• Press LEFT or Press CENTER of D-Pad to save setting and return
to CONFIG menu
ROF Default - The maximum allowed Rate of Fire if the eyes be-
come dirty or malfunction.
• The screen displays the current ROF Default setting (in BPS)
• Press RIGHT or Press CENTER on D-Pad to change the ROF
Default setting (default is 8 BPS)
• Press UP or DOWN to increase/decrease the BPS setting (7-12
BPS, in 1 BPS increments)
• Press LEFT or Press CENTER of D-Pad to save setting and return to CONFIG menu