ControlMacros book

Clear-Com
Eclipse Glossary
D - 3
Multiplexing The process by which two or more signals are 
transmitted over a single communications channel. Examples include 
time division and wavelength division multiplexing. 
Non-volatile Memory Data stored in the CPU’s firmware (ROM) that 
is not lost when the power is turned off.
Palette The port, keyGroup and Monitor selection screen in Production 
Maestro.
Panel Also referred to as “station” in some cases (usually older 
manuals).  Any intelligent intercom device connected to the rear-panel 
analog ports of the central matrix. This term does not refer to devices 
connected through interface modules.
Party Line A wired shared communication system based on a single 
screened pair of wires.  See the Encore range.  Matrix requires the 
CCI-22 to interface to it.
Port Any of the input/output connections (RJ-45 connectors) on the 
back panel of the central matrix. These connectors and the attached 
cables connect the central matrix to remote intercom devices. The 
term “port” emphasizes that the connection is a “portal” between the 
central matrix and the remote intercom devices. 
Program Any separate audio source that is fed into the intercom 
channels. In television applications, for example, “program” audio is 
the audio that is broadcast on air.
Rack Unit or RU Standardized unit of mounting space on a rack 
panel. Each rack unit is 1.75 inches (44.45 mm) of vertical mounting 
space. Therefore 1 RU is 1.75 inches (44.45 mm) of vertical mounting 
space, 2 RU is 3.5 inches (88.9 mm), 3 RU is 5.25 inches (133.35 
mm), and so on.
Remote Panel Any intelligent intercom device connected to the 
back-panel ports of the central matrix. This term does not refer to 
devices connected through interfaces.
Sidetone The sound of the panel operator’s own voice heard in their 
own earphone as they speak.
Source In this manual, the term “source” refers to a device—such as 
an intercom panel, interface, or beltpack —that sends audio into the 
matrix. The device to which audio is sent is called a “destination”.
VOX In the Eclipse system, when audio at a panel exceeds a 
threshold, a light switches on at the panel’s port card to visually cue 
the operator. The threshold level is set in the Eclipse Configuration 
Software.
V-Series Communications panels used with Eclipse systems providing 
advanced facilities.  Available in rack mount and desktop formats.

---

Clear-Com
Eclipse Glossary
D - 4

---

Clear-Com
Eclipse Manuals
D - 5
ECLIPSE MANUALS
The following manuals are available covering Eclipse products and 
accessories.
SOFTWARE MANUALS
Eclipse Configuration Software (ECS) Instruction Manual - 810299Z
Eclipse Logic Maestro Instruction Manual - 810414Z
Eclipse Production Maestro Quick Start Guide - 810409Z
Eclipse Production Maestro Installation and User Guide - 810410Z
Eclipse DECTSync Manual - 810412Z
Eclipse Host Computer Interface (HCI) Manual - 810413Z
HARDWARE MANUALS
Eclipse Omega Matrix Instruction Manual - 810290Z
Eclipse Median Matrix Instruction Manual - 810347Z
Eclipse PiCo Matrix Instruction Manual - 810348Z
Eclipse-32 Matrix Instruction Manual - 810315Z
Eclipse Matrix Installation Manual - 810298Z
Eclipse Upgrade Reference Manual - 810377Z
Eclipse V-Series Panels User Manual - 810365Z
Eclipse FOR-22 4-Wire Interface Instruction Manual - 810306Z
Eclipse CCI-22 Party Line Interface Instruction Manual - 810307Z
Eclipse TEL-14 Telephone Interface Instruction Manual - 810308Z
Eclipse GPI-6 General Purpose Inputs Instruction Manual - 810309Z
Eclipse RLY-6 General Purpose Outputs Instruction Manual - 810310Z
DIG-2 Digital Interface Instruction Manual - 810311Z
IMF-3, IMF-102, DIF-102 Interface Module Frame Instruction Manual - 
810313Z
Eclipse AES-6 Digital Interface Instruction Manual - 810383Z
Eclipse BAL-8 Isolation Interface Instruction Manual - 810403Z
Eclipse V-Series AES-3 Option Card Installation Instructions - 
810388Z
Eclipse V-Series XLR-7M Upgrade Instructions - 810405Z
Eclipse V-Series T-Adapter Installation Instructions - 810406Z
Eclipse FIM-202D Fiber Interface Instruction Manual - 810385Z

---

Clear-Com
Eclipse Manuals
D - 6
Eclipse FIM-102 Fiber Interface Instruction Manual - 810319Z
Eclipse FIM-108 Fiber Interface Instruction Manual - 810291Z
Eclipse 4000 Series II Panels Installation Guide - STA0530Z
Eclipse 4000 Series II Panels User Guide - STA0531Z
Eclipse ICS 1008E/1016E Panels Instruction Manual - 810404Z
Eclipse ICS 102/62 Panels Instruction Manual - 810302Z
Eclipse ICS 2003 Panel Instruction Manual 810303Z
Eclipse ICS 92/52 Panels Instruction Manual - 810301Z
Eclipse i-Station Instruction Manual - 810305Z
Eclipse ICS-21 Speaker Panel Instruction Manual - 810263Z
Eclipse ICS-22 Speaker Panel Instruction Manual - 810264Z
Eclipse ICS-24 Headset Panel Instruction Manual - 810265Z
Eclipse Digital Wireless Beltpack Instruction Manual - 810376Z

---

Clear-Com
Standard Limited Warranty
i
LIMITED WARRANTY
This document details the Clear-Com Standard Limited Warranty for all new products for sale within all 
regions with the exception of Military, Aerospace, and Government (MAG).  
EXCEPT AS SET FORTH HEREIN ("LIMITED WARRANTY"), CLEAR-COM MAKES NO OTHER 
WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY 
WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF THIRD PARTY RIGHTS, OR 
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED.
1. Standard Limited Warranty.  Clear-Com warrants its products, including supplied accessories, 
against defects in material or workmanship for the time periods as set forth below provided it was 
purchased from an authorized Clear-Com dealer or distributor.  
a) Pursuant to this Limited Warranty, Clear-Com will, at its option:
i)
repair the product using new or refurbished parts, or;
ii) replace the product with a new or refurbished product.
b) Remedies: In the event of a defect, the rights detailed in 1 (a) are your exclusive remedies.  For 
purposes of this Limited Warranty, "refurbished" means a product or part that has been returned 
to its original specifications.
c) Standard Warranty Period (by Product):
i)
All Clear-Com brand systems and products, including belt packs, have a Limited Warranty 
of two years, with the exception of;
(1) Cables, accessories, components & consumable items have a Limited Warranty of 90 
days.
(2) Any Clear-Com product that has been classified as obsolete at the time of sale has a 
Limited Warranty of 90 days from sales and will be replaced with the same product or a 
sales credit will be issued, at the sole discretion of Clear-Com.
(3) Headsets, handsets, microphones, and associated spare parts, as well as UHF wireless 
IFB products, have a Limited Warranty of one year.
(4) UHF WBS Analog wireless intercom systems have a Limited Warranty of three years.

---