Clear-Com
Eclipse Logic
Maestro Instruction Manual
1 - 4 3
Right clicking on the logic element in the design window displays an
options menu.
Figure 1-77: Menu Options for AND Logic Element
• Add Comment - add a comment to the logic element.
• Delete - delete logic element from design window.
• Cut - cut logic element from design window.
• Copy - copy logic element on design window.
• Add Input - add an input to the logic element.
• Change Gate Type - replace the logic
element with one selected
from the drop-down list.
NAND Gate
Combines two or more inputs to generate a single output. The
default
is two inputs but by right clicking on a NAND
gate to display the menu
additional inputs can be added. Unused inputs will default to the
TRUE state. The output is only true if at least one input is false. The
NAND gate adds a 25ms processing delay.
Table 1-2: Truth Table for NAND Logic Element
Input A
Input B
Output
False
False
True
False
True
True
True
False
True
True
True
False
Clear-Com
Eclipse Logic
Maestro Instruction Manual
1 - 4 4
Right clicking on the logic element in the design window displays an
options menu.
Figure 1-78: Menu Options for NAND Logic Element
• Add Comment - add a comment to the logic element.
• Delete - delete logic element from design window.
• Cut - cut logic element from design window.
• Copy - copy logic element on design window.
• Add Input - add an input to the logic element.
• Change Gate Type - replace the logic element with one selected
from the drop-down list.
OR Gate
Combines two or more inputs to generate a single output. The default
is two inputs but by right clicking on an OR gate to display the menu
additional inputs can be added. Unused inputs will default to the
TRUE state. The output is only true if one or more inputs are true. The
OR gate adds a 25ms processing delay.
Table 1-3: Truth Table for OR Logic Element
Right clicking on the logic element in the design window displays an
options menu.
Input A
Input B
Output
False
False
False
False
True
True
True
False
True
True
True
True
Clear-Com
Eclipse Logic Maestro Instruction Manual
1 - 4 6
Figure 1-80: Menu Options for NOR Logic Element
• Add Comment - add a comment to the logic element.
• Delete - delete logic element from design window.
• Cut - cut logic element from design window.
• Copy - copy logic element on design window.
• Add Input - add an input to the logic element.
• Change Gate Type - replace the logic element with one selected
from the drop-down list.
BUFFER Element
Used between a crosspoint trigger and a crosspoint action to reduce
the system resource usage. There is a constraint on the maximum
number of possible actions by crosspoint triggers and crosspoint
actions imposed by system resources.
In general the number of
possible triggers times the number of possible actions should not
exceed 4095. So if there are 16 possible triggers specified in a
crosspoint trigger and 16 possible crosspoint actions specified in a
crosspoint action the number of actions would be:
16 triggers x 16 actions = 256 events
which would be acceptable. If the result of setting up a system of
crosspoint triggers and crosspoint actions created more than 4095
possible actions an error would be reported
when the configuration
was downloaded.
In this case a buffer logic element should be placed between the
crosspoint trigger and crosspoint action. In this way the number of
actions the trigger crosspoint has to make is limited to the number of
trigger crosspoints, which only have to trigger the buffer.
The buffer
will then act on the crosspoints in the crosspoint action.
The BUFFER element adds a 25ms processing delay.