Laser cutting machine LaserCut-3000 is used for a cutting of wide range of materials:
constructional and stainless steel, aliminium and its alloys, copper alloys. It personifies the advanced
innovative solutions both from the laser technology and gantry systems fields.
The laser cutting machine is equipped with fiber-optical laser of international corporation IPG Photonics Corp,
which has perfectly proved itselfin the industrial cutting and welding systems, and the advantages of
Ruchservomotor gantry systems based onlinear drives, which give the guaranteed accuracy and dynamic
characteristics margin, ensuring reliable and long-term maintenance in the work shop conditions.
.
.
Main advantages:
High accuracy and speed of the contour-cutting of the sheet material with thickness from 0,5 to 25mm ;
The absence of open optical channel for energy transfer - the laser emission is transferred via flexible
optical channel directly into cutting zone;
The economy efficiency of the technological processes because of high efficiency factor of the fiber
itterbium laser (4 times more efficient than CO systems);
2
Low operating costs during system maintenance due to high reliability of the gantry system and itterbium
fiber laser, as well as the absence of needs to use high clearing gases for service of optical paths of the
laser;
Standart machine delivery includes section cutting table with 2 sliding pallettes, system of air filtration with
self-cleaning of cartridges. Thanks to it’s this machine provides optimum productivity, precision
processing, high quality cutting and profitability of operation.
LASERCUT-3000
Tel: +375(17) 254-04-43, 254-04-47; Fax: +375(17) 254-04-48 email: info@ruchservomotor.com, http://www.ruchservomotor.com
Ruchservomotor Ltd. BY-220019, Montazhnikov 5, Minsk, Republic of Belarus
LA
S
E
R
C
U
T-
30
00
LASER CUTTING MACHINES
based on direct drives and fiber laser
LaserCUT-3000 in its basic assembly consists of gantry system 3x1.5m(option - 2x6m)
Z-stage, controller, sensor for tracking the sheet surface, itterbium fibre laser with power
from 2kW to 4kW,cooled optical head with collimator and exchangeable nozzles for
supplying cutting gas.
In the capacity of feeding devices linear synchronous servomotors made by
“Ruchservomotor Ltd.” are used.The motors are built in aluminium profile with linear
feedback sensors and precision linear guideways, which are protected from sparks and
drops of smelt by heat-resistant bellows.
High peak force and rigidity of the linear drive ensure required accelerations up to 1.5g,
which are necessary for improvement of the productivity of the machine during the
cutting parts with small bending radius and acute angles.
Due to the direct drive usage the laser cutting machines are characterized by high feed
rate and free movement speed up to 180m/min high static and dynamic accuracy and
absence of backlash.
-3000
,
The used software, CNC and controllers manufactured are characterized by completely
digital control a drive, compatibility with widespread programs CAD-CAM of optimization
sheet cutting,interpretation of standard formats of commands of moving in a G-code,
and also the spline-interpolation, allowing to carry out cutting any curvilinear trajectories
without a time-lapse stop, that essentially raises productivity of the machine tool.
While in service laser machine LaserCUT
made by Ruchservomotor have proved
as the exact, high-efficiency and reliable equipment completely corresponding to
requirements of modern manufacture.
Short description:
Technical characteristics
* The accuracy of the details depends on the material properties and degree of its heating. Measurements accordingly to VDI/DGQ 3441 standarts,
measurement length 1m
Industry standart NC codes DIN/ISO-6983 support
LASER CUTTING SYSTEMS
LA
S
E
R
C
U
T-
30
00
Tel: +375(17) 254-04-43, 254-04-47; Fax: +375(17) 254-04-48 email: info@ruchservomotor.com, http://www.ruchservomotor.com
Ruchservomotor Ltd. BY-220019, Montazhnikov 5, Minsk, Republic of Belarus
Maximal stroke X, m
Maximal stroke Y, m
Maximal stroke Z, mm
Maximum cut thickness on the steel/stainless steel, mm
Maximum stroke speed on X,Y axes, m/min
Repeatability, mm
Resolution, mm
Stroke speed on Z axe, m/min
2
Maximum acceleration,m/s
Controller type
Controller interface
Recommended laser power, kW
Wave length, micron
Maximum weight of processing details, kg
Overall dimensions of the machine, mm
3 (max 6m)
1,5 (max 2m)
100
25/13
180
±0.01*
0.001
5
15
LSMC-4
RS-232, USB
2.0-4.0
1.065
900
8700 x 2500 x 2500