Lazercut3000eng cdr

---

   

                                            

 

                         

Laser cutting machine LaserCut-3000 is used for a cutting of wide range of materials:

constructional and stainless steel, aliminium and its alloys, copper alloys. It personifies the advanced 

innovative solutions both from the laser technology and gantry systems fields.

The laser cutting machine is equipped with fiber-optical laser  of international corporation IPG Photonics Corp,

which has perfectly proved itselfin the industrial cutting and welding systems, and the advantages of 

Ruchservomotor gantry systems based onlinear drives, which give the guaranteed accuracy and dynamic 

characteristics margin, ensuring reliable and long-term maintenance in the work shop conditions.

.

                                      .  

Main advantages:

High accuracy and speed of the contour-cutting of the sheet material with thickness from 0,5 to 25mm ; 

The absence of open optical channel for energy transfer - the laser emission is transferred via flexible 

optical channel directly into cutting zone;

The economy efficiency of the technological processes because of  high efficiency factor of the fiber 

itterbium laser (4 times more efficient than CO  systems);

2

Low operating costs during system maintenance due to high reliability of the gantry system and itterbium 

fiber laser, as well as the absence of needs to use high clearing gases for service of optical paths of the 

laser;

Standart machine delivery includes section cutting table with 2 sliding pallettes, system of air filtration with

self-cleaning of cartridges. Thanks to it’s this machine provides optimum productivity, precision 

processing, high quality cutting and profitability of operation.

LASERCUT-3000

Tel: [phone]; Fax: [phone] email: [e-mail],  http://www.ruchservomotor.com

Ruchservomotor Ltd. BY-220019, Montazhnikov 5, Minsk, Republic of Belarus 

 

LA

S

E

R

C

U

T-

30

00

LASER CUTTING MACHINES

based on direct drives and fiber laser

---

   

LaserCUT-3000 in its basic assembly consists of gantry system 3x1.5m(option - 2x6m)

Z-stage, controller, sensor for tracking the sheet surface, itterbium fibre laser with power 

from 2kW to 4kW,cooled optical head with collimator and exchangeable nozzles for

 supplying cutting gas.

In the capacity of feeding devices linear synchronous servomotors made by 

“Ruchservomotor Ltd.” are used.The motors are built in aluminium profile with linear 

feedback sensors and precision linear guideways, which are protected from sparks and 

drops of smelt by heat-resistant bellows.

High peak force and rigidity of the linear drive ensure required accelerations up to 1.5g, 

which are necessary for improvement of the productivity of the machine during the 

cutting parts with small bending radius and acute angles. 

Due to the direct drive usage the laser cutting machines are characterized by high feed 

rate and free movement speed up to 180m/min  high static and dynamic accuracy and 

absence of backlash.

-3000

   

     

,

 

The used software, CNC and controllers manufactured are characterized by completely 

digital control a drive, compatibility with widespread programs CAD-CAM of optimization 

sheet cutting,interpretation of standard formats of commands of moving in a G-code, 

and also the spline-interpolation, allowing to carry out cutting any curvilinear trajectories 

without a time-lapse stop, that essentially raises productivity of the machine tool.

While in service laser machine LaserCUT

 made by Ruchservomotor have proved 

as the exact, high-efficiency and reliable equipment completely corresponding to

 requirements of modern manufacture.

Short description:

Technical characteristics

* The accuracy of the details depends on the material properties and degree of its heating. Measurements accordingly to VDI/DGQ 3441 standarts,

measurement length 1m

Industry standart NC codes DIN/ISO-6983 support

LASER CUTTING SYSTEMS

LA

S

E

R

C

U

T-

30

00

Tel: [phone]; Fax: [phone] email: [e-mail],  http://www.ruchservomotor.com

Ruchservomotor Ltd. BY-220019, Montazhnikov 5, Minsk, Republic of Belarus 

 

Maximal stroke X, m

Maximal stroke Y, m

Maximal stroke Z, mm

Maximum cut thickness on the steel/stainless steel, mm

Maximum stroke speed on X,Y axes,  m/min

Repeatability, mm

Resolution, mm 

Stroke speed on Z axe,  m/min

2

Maximum acceleration,m/s

Controller type

Controller interface

Recommended laser power, kW

Wave length, micron

Maximum weight of processing details, kg

Overall dimensions of the machine, mm

3 (max 6m)

1,5 (max 2m)

100

25/13

180

±0.01*

0.001

5

15

LSMC-4

RS-232, USB

2.0-4.0

1.065

900

8700 x 2500 x 2500