01 ekiM 2010 30 eylüL 2011 akademik faaliyetleri
Yüklə 172 Kb.
|
|
MAKİNE MÜHENDİSLİĞİ BÖLÜMÜ 01 EKİM 2010 – 30 EYLÜL 2011 AKADEMİK FAALİYET RAPORU 1-ULUSLAR ARASI HAKEMLİ DERGİLERDE YAYIMLANAN MAKALELER Akbarov, S.D., Agasiyev, E.R., Zamanov, A.D., “Wave propagation in a pre-strained compressible elastic sandwich plate”, European Journal of Mechanics A/Solids, Vol. 30, pp. 409–422, 2011. Akbarov, S.D., Mamedov, A.R., “Stability loss of the micro-fiber in the elastic and viscoelastic matrix near the free convex cylidrical surface”, European Journal of Mechanics A/Solids, Issue 2, Vol. 30, pp. 167–182, 2011. Akbarov, S.D., Karakaya, S., 3”D Analyses of the stability loss of the circular solid cylinder made from viscoelastic composite material”, CMC-Computers Materials & Continua , Issue 1, Vol. 22, pp. 1–38, 2011. Akbarov, S.D., Kosker, R., Cinar, N.T. , “Stress Distribution in an Infinite body containing two neighboring locally curved nanofibers” , CMC-Computers Materials & Continua , Issue 2, Vol. 21, pp. 119–146, 2011. Akbarov, SD., Guliev, M.S., Kepceler, T., “Dispersion relations of axisymmetric wave propagation in initially twisted bi-material compounded cylinders”, Journal of Sound and Vibration, Vol. 330, pp. 1644–1664, 2011. Akbarov, S.D., Yildiz, A., Eroz, M., “FEM modeling of the time-harmonic dynamical stress field problem for a pre-stressed plate-strip resting on a rigid foundation”, Applied Mathematical Modelling, Issue 2, Vol. 35, pp. 952–964, 2011. Akbarov, S.D., Kepceler, T., Egilmez, M.M., “Torsional wave dispersion in a finitely pre-strained hollow sandwich circular cylinder”, Journal of Sound and Vibration, Issues 18-19, Volume 330, Pages 4519-4537, 2011. Alan, K.S., Akbarov, S.D. , “Analysis of stresses in an infinite elastic body with a locally curved covered nanofiber”, Mechanics of Composite Materials, Issue 3, Vol. 47, pp. 343–358, 2011. Cinar, N.T., Kosker, R., Akbarov, S.D., Akat, E. , “Stress distribution caused by two neighboring out-of-plane locally cophasally curved fibers in a composite material”, Mechanics of Composite Materials, Issue 5, Vol. 46, pp. 555–572, 2010. Akbarov S.D.,Guliev M.S., Kepceler T., “Propagation of axisymmetric waves in an initially twisted circular compound bimaterial cylinder with a soft inner and a stiff outer constituents”, Mechanics of Composite Materials, Issue 6, Vol. 46, pp. 628–638, 2011. Akbarov, S.D., Yahnioglu, N. , “Delamination buckling of a rectangular orthotropic composite plate containing a band crack”, Mechanics of Composite Materials, Issue 5, Vol. 46, pp. 493–504, 2010. Sağırlı, A., Azeloglu, C.O., Guclu, R., Yazici, H., “Self-tuning fuzzy logic control of crane structures against earthquake ınduced vibration" Nonlinear Dynamics, 64(4), 375-384, 2011. Demir, C., İzmirli, S.B., “The effects of support size on the vibration of the point supported plate” International Journal of the Physical Sciences, Vol. 6(8), pp. 1920–1928, 18 April, 2011. Sezer, S., Atalay, E.., “Dynamic Modeling and Fuzzy Logic Control of Vibrations of a Railway Vehicle for Different Track Irregularities”, Simulation Modelling Practice and Theory, SIMPAT, 19, 1873-1894, 2011. Cetin, S., Sivrioglu, S., Zergeroglu, E., Yuksek, I.,“Semi-active H robust control of six degree of freedom structural system using MR damper”, Turkish Journal of Electrical Engineering and Computer Sciences, Vol.19, No.5 pp. 797–805, September 2011. Dikmen, F., Bayraktar, M., Guclu, R., “Vibration analysis of 19 degrees of freedom rail vehicle”, Scientific Research and Essays, (accepted in May, in press) 2011. Metin, M., Guclu, R., “Active vibration control with comparative algorithms of half rail vehicle model under various track ırregularities”, Journal of Vibration and Control, Issue 10, Vol. 17, pp. 1525–1539, (2011). Metin, M., Guclu, R., “Vibrations control of light rail transportation vehicle via pıd type fuzzy controller using parameters adaptive method”, Turkish Journal of Electirical Engineering, Issue 5, Vol. 19, pp. 807–816, (2011). Yumurtacı, Z., Toprak, K., “An economic analysis of hydrogen production using wind power” International Journal of Renewable Energy Research, Volume 1,No:1, pp 11- 17,January,2011 Dagdas, A. “Performance optimisation of the combined single flash binary geothermal power plant”, Int. J. Exergy, Vol. 8, No. 2, pp.194–210, 2011. Işık, B., Altan, E., “Cutting forces in orthogonal turning of unidirectional glass fiber reinforced plastic composites”, Advanced Composites Letters, Issue 1, Vol. 20, pp. 5–12, (2011). Eker, B., Eker Akdogan,A., “Developing packaging by using smart material which helps to realize spoilage in yoghurt”, key engineering materials (Volumes 471 - 472), Volume Composite Science and Technology,p.185, 2011.Sahin, I., Akdogan Eker, A., “analysis of microstructures and mechanical properties of particle reinforced alsi7mg2 matrix composite materials”, Journal of Materials Engineering and Performance, 20, 6:1090-1096, 08/2011. Kıyak, M., Kaner, B., Sahin, I., Aldemir, B., Cakir, O., "The dependence of tool overhang on surface quality and tool wear in the turning process", International Journal of Advanced Manufacturing Technology, 51, 5-8:431–438, 11/2010. Akdogan,A., "Design quality ın mechanical engineering application",International Journal For Quality Resarch, Vol.4, No.3, 2010. Ersoy, H.V., “Flow of a second order/grade fluid induced by a pull of disks in an orthogonal rheometer”, International Review of Chemical Engineering, 3, 585-591, 2011. Ayhan, A. O., “Simulation of three-dimensional fatigue crack propagation using enriched finite elements,” Computers and Structures, Vol. 89, pp. 801–812, 2011. Ayhan, A. O., Yucel U., “Stress intensity factor equations for mixed-mode surface and corner cracks in finite-thickness plates subjected to tension loads,” International Journal of Pressure Vessels and Piping, Vol. 88, pp. 181–188, 2011. Nart, E., Ayhan, A. O., “Crack ınsertion, meshing and fracture analysis of structures using tetrahedral finite elements,” European Journal of Mechanics - A/Solids, Vol. 30, pp. 293–306, 2011. Gharib, M., Celik ,A., Hurmuzlu, Y., "Shock absorption using linear particle chains with multiple ımpacts", ASME Journal of Applied Mechanics.,Mayis,2011,Vol. 78, Issue 3,0311005( 9 pages),doi:10.1115/1.4003349. Ozer, H., Oz, Ozkan, “Three dimensional finite element analysis of bi-adhesively bonded double lap joint”, International Journal of Adhesion and Adhesives, in Press. Ozer, H., Oz, Ozkan, “Joint stress optimization by the hybrid adhesive lap joint”, Advanced Materials Research (AMR), in Press. Eren, İ., “Varıous Calculatıon methods for large deflectıons of nonlınear elastıc materıal subjected to a moment” International Journal of Engineering & Applied Sciences (IJEAS) Vol.3, Issue 1(2011) pp.71-79. Kaleli, H., Bektaş, D., “Effect of additive level on the surface of diesel engine cylinder liner”, Journal of the Balkan Tribological Association, Lubrication section, Vol. 17 No. 1, 2011, pp.139–150, ISSN 1310-4772. (S.C.I.Expanded). Kaleli, H., Sandalcı, T., “Condition MONİTORİNG OF OPTİMUM OİL DRAİN INTERVAL FOR FİVE DİESEL LİGHT DUTY COMMERCİAL VEHİCLES SERVİCİNG FOR A PARCEL SERVİCE FİRM In Turkey”, Journal of the Balkan Tribological Association, Vol. 17, No 2, 2011, pp.289–304, ISSN 1310-4772. (S.C.I.Expanded). Bektas, D., and Kaleli, H., “Comparison of Additive Protective Layer on The Cylinder Liner Surface Using Diesel Engine and Pin on Plate Test Rigs”, Journal of the Balkan Tribological Association, Vol. 17, No 3, 2011, pp.411–425, ISSN 1310-4772. (S.C.I.Expanded). Istif, I., Isin, O., Uzunsoy, E., Uzunsoy, D., “Linear model for PM brake lining material wear behaviour”, accepted for publication in MP Materials Testing (Materialprüfung), ISSN:0025-5300, issue:11-12/2010, Page: 795-799. Balcilar, M., Dalkilic, A.S., Wongwises, S., “Artificial neural network (ANN) techniques for the determination of condensation heat transfer characteristics during downward annular flow of R134a inside a vertical smooth tube”, International Communications in Heat and Mass Transfer, 38, 75-84, 2011. ( 1 citation) Dalkilic, A.S., Wongwises, S., “Experimental study on the condensation heat transfer coefficients in high mass flux region in annular flow regime of HFC-134a inside the vertical smooth tube”, Heat Transfer Engineering, 32, 33-44, 2011. Dalkilic, A.S., “ Condensation pressure drop characteristics of various refrigerants in a horizontal smooth tube”, International Communications in Heat and Mass Transfer, 38, 504-512, 2011. Dalkilic, A.S., Laohalertdecha, S., Wongwises, S., “New experimental approach on the determination of condensation heat transfer coefficient using frictional pressure drop and void fraction models in a vertical tube”, Energy Conversion and Management, 51, 2535-2547, 2010. ( 3 citation) Dalkilic, A.S., Teke, I., Wongwises, S., ”Experimental analysis for the determination of the convective heat transfer coefficient by measuring pressure drop directly during annular condensation flow of R134a in a vertical smooth tube”, International Journal of Heat and Mass Transfer, 54, 1008-1014, 2011. ( 1 citation) Dalkilic, A.S., Wongwises, S., “A performance comparison of vapour compression refrigeration system using various alternative refrigerants”, International Communications in Heat and Mass Transfer, 37, 1340-1349, 2010. ( 1 citation) Demir,H., Dalkilic, A.S., Kürekci, N.A., Duangthongsuk, W., Wongwises, S., "Numerical investigation on the single phase forced convection heat transfer characteristics of TiO2 nanofluids in a double-tube counter flow heat exchanger", International Communications in Heat and Mass Transfer (ISI) , 218-228, 2011. Onan,C. , Özkan,D.B., Erdem,S., “Exergy analysis of a solar assisted absorption cooling system on an hourly basis”, Energy, 35, 5277 – 5285, 2010. (2 citations) Özkan,D.B., Onan,C., “Optimization of insulation thickness for different glazing areas in buildings for various climatic regions in Turkey”, Applied Energy, 88, 1331-1342, 2011. ( 1 citation) Balcilar, M., Dalkilic, S.A. , Bolat, B., Wongwises S., “Investigation of empirical correlations on the determination of condensation heat transfer characteristic during downward annular flow of R134a inside a vertical smooth tube using artifical intelligence algorithms”, Mechanical Science and Technology, Issue 10, Vol. 25, pp. 2683–2701, 2011. Bolat, B., Cortes P., “Genetic and tabu search approaches for optimizing the hall call- Car allocation problem in elevator group systems”, Applied Soft Computing, Issue 2, Vol. 11, pp. 1792–1800, 2010. Demir, O., Keskin, I., Cetin, S., “Modelling and Control of a nonlinear half-vehicle suspension system: a hybrid fuzzy logic approach”, Nonlinear Dynamics, online first, 14 July 2011. Hassan, T, Colak, O. U.,Clayton, P. “Uniaxial Strain and Stress-Controlled Cyclic Responses of Ultrahigh Molecular Weight Polyethylene: Experiments and Model Simulations”, Journal of Engineering Materials and Technology, Transactions of the ASME, 133, 2, 02010-1-9, 2011. 2- ULUSLARARASI BİLİMSEL TOPLANTILARDA SUNULAN VE BİLDİRİ KİTABINDA TAM METNİ YAYIMLANAN BİLDİRİLER Akbarov, S.D., Ipek C., “The dispersion of the axisymmetric longitudinal waves in the pre-strained bi-material hollow cylinder with the imperfect interface condition”, The 10th International Conference on Vibration Problems, 05-08 September 2011, Prague, Czech Republic, Vol. 1, pp. 693–698, (2011). Akbarov, S.D., Ilhan N., Temugan A., “On the dynamics of the oscillating moving point load acting on the system comprasing a pre-stressed layer and pre-stressed half-space”, The 10th International Conference on Vibration Problems, 05-08 September 2011, Prague, Czech Republic, Vol. 1, pp. 255–267, (2011). Akbarov, S.D., Kepceler T., Egilmez M.M., “Torsional wave propagation in a pre-strained hollow three-layered circular cylinder”, The 10th International Conference on Vibration Problems, 05-08 September 2011, Prague, Czech Republic, Vol. 1, pp. 681–686, (2011). Akbarov, S.D., Ilhan N., “On the stress field caused by the time harmonic force in the system consisting of the piezoelectric covering layer and piezoelectric halp-plane”, The 10th International Conference on Vibration Problems, 05-08 September 2011, Prague, Czech Republic, Vol. 1, pp. 261–267, (2011). Akbarov, S.D., Yahnioglu N., Yesil U.B., “Natural vibration of an initial stressed rectangular composite thick plate with two neighboring oval cylindrical holes”, The 10th International Conference on Vibration Problems, 05-08 September 2011, Prague, Czech Republic, Issue 0, Vol. 2, pp. 162–167, (2011). Demir, C., Öz F., “Free Vibration Analysis of a Functionally Graded Beam with Finite Element Methods”, The 10th International Conference on Vibration Problems, , Vol. 2, pp. 37–43, Prague, 05-08 September 2011. Tahrali, N., Erdem, H., Bayraktar, M., “Stress Analysis, Life and Reliability Evaluation for the Eccentric Press Shaft”, 1st. International Scientific Conference on Engineering Mnufacturing and Advanced Technologies (MAT 2010), 18–20 November 2010, Mostar, BOSNA and HERZEGOVİNA. Yazici, H., Guclu, R., Kucukdemiral I.B., "Delay-Dependent H Controller Design for Seismic Excited Structures with Actuator Delay under Consideration of Actuator Saturation", The 18th IFAC World Congress, pp: 11036-11041, Milano, Italy, August 28-Semtember 2, 2011. Yazici, H., Guclu, R., Kucukdemiral I.B., "Seismic Vibration Attenuation of a Structural Systems Havig Actuotor Saturation with a Delay-Dependent H Controller", Vibration Problems ICOVP 2011: The 10th International Conference on Vibration Problems, Springer Proceedings in Physics, Vol:139 pp.413-417, DOI: 10.1007/978-94-007-2069-5_56, Prag, Czech Republic, 5-8 September 2011. Yazici, H., Guclu, R., Keskin, G., "Active Vibration Control of Seismic-Excited Structural System With LMI Based Dynamic Output-Feedback H∞ Controller", Vibration Problems ICOVP 2011: The 10th International Conference on Vibration problems, Springer Proceedings in Physics, Vol:139 pp. 419–424, DOI: 10.1007/978–94-007-2069-5_57, Prag, Czech Republic, 5-8 September 2011. Yumurtac,ı Z., Malkoç, Y., Demirhan, A. Y., “Variability Analysis of Wind and Wind Power in Turkey”, IRENEC 2011 Internatıonal Renewable Energy Conference Istanbul 6-8 October2011. Durakbasa, N. M., Bogrekcı, I., Demırcıoglu*, P., Bas, G., Gunay, A.,’’Surface Characterızatıon By Accurate Measurement And Image Processıng Systems On Machıned Surfaces Of Precısıon Cuttıng Tools’’ XIV National and V International Technical and Scientific Conference on Metrology in Production Engineering Eylül, 2011. Uysal, A., Altan, E., “A New Slip-Line Field Modeling of Orthogonal Machining for a Worn Tool”, International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011, cilt 3, s. 193-198, Orlando, Florida, ABD, 19-22 Temmuz 2011. Altan, M., Yıldırım, H., ”Effects of Nano Zno Particles on Antibacterial and Mechanical Properties of Polypropylene Matrix Composites”, 14 th International Conference on Advances in Materials & Processing Technologies, Abs.No.NTOO7,13-16th July, 2011, Istanbul, Turkey. Uysal ,A., Ozturk, S., Altan, E., “A Slip-Line Approach to the Micro-Cutting Process with a Rounded-Edge Tool”, 14th International Conference on Advances in Materials & Processing Technologies AMPT2011, İstanbul, Türkiye. 13–16 Temmuz 2011. Sagbas, B., Durakbasa, M.N., “Coordinate Metrology and Coordinate Measuring Machines for Biomedical Applications”, The International Journal of Arts & Sciences (IJAS) Conferences, 21-24 June 2011, Prague, Czech Republic. Vanlı A.S., "Investigation of Different Mass Production Lines Used for High Pressure Die Casting of Magnesium Alloy Products", IJAS 2011, International Journal of Arts and Sciences Conference, Prague-Czech Republic, ISSN: 1944-6934 (CD de), 21-24 Haziran 2011. Sagbas, B., Durakbasa, M.N., “Measurement of Wear in Orthopedic Prosthesis”, Advances in Applied Physics and Materials Science Congress, 12-15 May 2011, Antalya, Turkiye. Durakbasa, M.N., Osanna, P.H., Sagbas, B., Hornikova, A., "High Precision Production Metrology for Quality Improvement in Biomedical Applications", 8th International Conference on Measurement, Smolenice, Slovakia; 04-27-2011 - 04-30-2011; in: "Measurement 2011", VEDA, Bratislava, Slovakia (2011), ISBN: 978-80-969-672-4-7; 135 - 140. Sagbas, B., Turan, A., “Mathematical Modelling of Friction, Wear and Lubrication in Artificial Hip Joints”, The International Journal of Arts & Sciences (IJAS) Conferences, 21-24 March 2011, Orlando, USA. Hornikova, A., Bas, G., Sagbas, B., Durakbasa, M.N., “Contributing With Design of Experiment Theory to Quality”, 1st International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, March 17th-19th 2011; 95-100. Mert, T.,Yumurtaci, S., "Programming of Welding Robots and an Application of a Case Study: Automated Arc Welding of an Automobile Crash Box with Six-Axis Articulated Arm Welding Robot", International Journal of Arts &Sciences Las Vegas Conference, 7-10 March 2011, Las Vegas, NV, U.S.A. Akdoğan, (Nomak) A., “Measurement Techniques and Precision Measurement Problems of Tool Radius”, International Journal of Arts & Sciences (IJAS) Prague Conference, Czech Republic, (CD’de), Haziran 2011. Akdoğan, Eker, A., Küçükyildirim, B., O., “Quality Parameters in Nanotechnologic Applications”, 5th International Quality Conference, Center for Quality, Faculty of Mechanical Engineering, University of Kragujevac, Sırbistan, Kragujevac, 20 Mayıs, 2011. Altan M., Yıldırım, H., Uysal A., “Tensile Properties of Polypropylene/Metal Oxide Nano Composites”, ISTEC 2010 International Science and Technology Conference, s. 706-710, 27-29 Ekim 2010, Kuzey Kıbrıs. Altan, M., Yıldırım, H., “Mechanical and morphological properties of polypropylene and high density polyethylene matrix composites reinforced with surface modified nano sized TiO2 particles” International Conference on Materials Science and Engineering, Pages 219-224, 27-29th October, 2010, Paris, France. Uysal, A., Dogan, G., “A Study of Rapid Prototyping by Using Electrolyte Jet”, Conference of International Journal of Arts & Sciences (IJAS), Almanya, Gottenheim, 29 Kasım - 3 Aralık 2010. Küçükyıldırım, B. O., Akdogan Eker, A., Eker, B., “Karbon Nanotüp Takviyeli Poliester Matrisli Kompozit Malzeme Üretimi ve Mekanik Özelliklerinin İncelenmesi”, 13th International Materials Symposium, Denizli, 13-15 Ekim, 2010. Ozer, H., Oz, O., “Three Dimensional Finite Element Analysis of Bi-Adhesively Bonded Double Lap Joint”, International Conference on Structural on Adhesive Bonding (AB 2011), 73, Porto, Portugal, 2011. Ozer, H., Ornek, M.A., F”ree Vibration Analysis of Beam with Multiple Cracks”, International Symposium on Advances in Applied Mechanics and Modern Information Technologies 2011 (ISAAMMIT-2011), 256-260, Baku, Azerbaijan, 2011. Ozer, H., Oz, O., J”oint Stress Optimization by the Hybrid Adhesive Lap Joint”, 14th International Conference on Advances in Materials & Processing Technologies (AMPT 2011), 489, Istanbul, 2011. Uslu, M., Kurtis, C., Ayhan, A. O., Nart, E., “Stress Intensity Factors for Three-Dimensional Cracks in Plates Subjected to Thermal and Displacement Controlled Loading,” In Abstract Book of International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, CFRAC 2011, Barcelona, Spain, June 6-8, 2011. Alışverişçi, G. F., “Nonlinear Analysis of Shaking Conveyers with Single-mass; Crank-and-rod”, Advances in Applied Physics &Materials Science Congress, ANTALYA-TURKEY May 12-15 2011 Mirada Del Mar Hotel, KEMER. AIP CONFERENCE PROCEEDINGS in Pres. Alışverişçi, G. F., Bayıroğlu, H., G. Unal, “The Working Range of Vibrational Conveyers with Nonideal Vibration Exciter: Primary Resonance”, The 10th International Conference on Vibration Problems, Technical University of Liberic, pp:120-125, (ICOVP2011), September 5-8, 2011, Prague. Czech Republic. Bayıroğlu, H., Alışverişçi, G.F., Unal, G., “The Working Range of Vibrational Conveyers with Nonideal Vibration Exciter: Superharmonic and Subharmonic Resonance”, The 10th International Conference on Vibration Problems, Technical University of Liberic, pp:126-131, (ICOVP2011), September 5-8, 2011, Prague. Czech Republic. Bayıroğlu, H., “Nonlinear Analysis of Unbalanced mass of vertical Conveyer -Elivator”, Advances in Applied Physics &Materials Science Congress, ANTALYA-TURKEY May 12-15 2011 Mirada Del Mar Hotel, KEMER. AIP CONFERENCE PROCEEDINGS in Press. Çolak, O. Ü. , Asmaz, K., Hassan, T., “Mechanical Characterization and Modeling of Cyclic Behavior of Ultra High Molecular Weight Polyethylene (UHMWPE)” 14th International Conference on Advances in Materials and Processing Technologies, July 13-16, 2011, İstanbul. Uslu M., “Finite Element Analysis of Adhesively Bonded Tongue and Groove Geometry of Thick Composite Structures”, International Symposium on Models and Modeling Methodologies in Science and Engineering Orlando, Florida, USA, Vol. 3, (2011). Uslu M. , Kremzer, M., “Characteristics of Graphite Distributions in Polymeric Functionally Gradient Materials FGMs Manufactured by the Centrifugal Casting Method”, Conference of International Journal of Arts & Sciences (Germany), (2010). Istif, I., Isin, O., Uzunsoy, E., Uzunsoy, D., “Prediction of Wear Behavior Characteristics of PM Brake Lining Using Non‐Linear Modeling”, 14th International Conference On Advances In Materials and Processing Technologies, Istanbul, Turkey, July 13-16, 2011. Karagoz, Y., Eroglu, M., Orak, E., Sandalci, T., "Effects of Hydrogen Addition on Combustion and Emission Characteristics of a SI Engine at Idle Condition", Proceedings of the International Conference on Hydrogen Production (ICH2P-11), 19-22June 2011, Thessaloniki, Greece. Ağra,Ö., Atayılmaz, Ş.Ö., Demir, H., Teke, İ., “ Environmental impact of optimum insulation thickness in buildings”, World Renewable Energy Congress 2011, İsveç, 8-13 Mayıs 2011. Akbulut, U., Açıkgöz, Ö., Utlu, Z., Kincay, O., “Examination of Usage of Hybrid Renewable Energy System on Cooling Purposes by Means of Analyzing’, Humboldt Kolleg Istanbul 2010, İstanbul, 21-24 Ekim 2010. Akbulut, U., Yoru, Y., Kıncay, O., “Annual Investigation of Ground Source Heat Pump System Performance on a Wall Heating System in Istanbul”, The 6th International Green Energy Conference, IGEC-VI, , Anadolu University, Eskişehir, 5-9 Haziran 2011. Çubuk, M.H., Emanet,Ö., Ağra, Ö., “Energy Efficient Building in Third Climatic Region of Turkey”, World Renewable Energy Congress 2011, İsveç, Linkoping, 8-13 Mayıs 2011. Dalkılıç, A.S., Kürekci, N.A., Wongwises, S., “Prediction of Two-Phase Friction Factor of Refrigerants inside a Vertical Tube Using CFD Analysis for Homogeneous Condensation Model”, ASME-JSME-KSME Joint Fluids Engineering Conference 2011, Japonya, Hamamatsu, Shizuoka, 24-29 Temmuz 2011. Demir,H., Ağra,Ö., Atayılmaz, Ş.Ö., “Economical analysis of a chemical heat pump system for waste heat recovery”, World Renewable Energy Congress 2011, İsveç, Linkoping, 8-13 Mayıs 2011. Demir,H., Atayılmaz, Ş.Ö., Ağra,Ö Teke, İ., “Effects of the nano particle concentration on natural convection heat transfer from horizontal concentric cylinder system cooling in the ambient air”, ASME International Mechanical Engineering Congress and Exposition, 2011, Amerika Birleşik Devletleri, Denver, 11-17 Kasım 2011. Demir,H., Atayılmaz, Ş.Ö., Ağra,Ö., “Experimental ground source heat pump system to investigate heat transfer in soil”, World Renewable Energy Congress 2011, İsveç, Linkoping, 8-13 Mayıs 2011. Erdem, S., Özkan, D.B., Onan, C., “Economic Analysis of Solar Assisted Ground Source Heat Pump System in Heating and Cooling a Villa in Mardin” Humboldt Kolleg İstanbul 2010, İstanbul, 21-24 Ekim 2010. Kıncay, O., Akbulut, U., Yoru, Y., Acikgoz, O., Karakoc, H., “Investigation of Usage of Ground Source Heat Pump System on Wall Heating”, AIVC International Conference 2010, Low Energy and Sustainable Ventilation Technologies for Green Buildings, Kore, Seul 26-28 Ekim 2010. Onan,C., Özkan, D.B., “Daily Exergy Assesment Of LiBr-Water Absorption Chiller Used For Solar Cooling” Proceedings of the 4th international conference on energy sustainability Es2010, 2010, Amerika Birleşik Devletleri, Phoenix, Arizona, 17-22 Mayıs 2010. Özkan, D.B., Onan,C., “A new approach to determine optimum insulation thickness for all buildings in Turkey based on heating loads and heat gains” Proceedings of the 4th international conference on energy sustainability, Es2010, Amerika Birleşik Devletleri, Phoenix, Arizona, 17-22 Mayıs 2010. Özkan, D.B., Onan,C., Agra, O. “Coefficient of performance study on R600a, R134a, R290, R407c, R410a, R32 as an alternative refrigerant to R22”, Clima 2010, , Antalya, 9-12 Mayıs 2010. Yoru, Y., Akbulut, U., Kıncay, O., ”he Importance of Wall Heating (radiant) Systems in Buildings”, Humboldt Kolleg Istanbul 2010, İstanbul, 21-24 Ekim 2010. Bolat, B., Balcilar, M., Dalkilic, A.S., Wongwises, S., “Optimization of the relationship between the two-phase friction factor and Reynolds equivalent number model by the means of Genetic Algorithm”, ASME/JSME 8th Thermal Engineering Joint Conference, ASME, Hawaii, 2011. Colak, O.U., Picu C., “Chracterization of Creep Behavior of Epoxy and Graphene-Epoxy Nancomposite using Nanoindentation”, Multiphase Polymer and Polymer Composites, 7-10 Haziran, Paris, 2011. Colak, O.U., Erdonmez, C., Picu, C. “Fabrication of Graphene-Epoxy Nanocomposites and Characterization with Nanoindentation”, 14th International Conference On Advances In Materials & Processing Technologies (AMPT), 13-16 Temmuz, İstanbul, 2011. Colak, O.U., Acar, A., Ergenekon, E., “Investigation of Hygro-Thermal Cycle Effects on PEM Fuel Cell Membranes”, 14th International Conference On Advances In Materials & Processing Technologies (AMPT), 13-16 Temmuz, İstanbul, 2011. 3-ULUSAL HAKEMLİ DERGİLERDE YAYIMLANAN MAKALELER Yurci, M. E., CADEM A.Ş., “Turcoto: Tasarımdan Markaya Giden Yol”, FORTUNE Dergisi, Yıl: 4, Sayı 48, S.88 – 96, Eylül 2011. Yurci, M. E., Öksüzömer, Y., Baydar, M. S., “Makina Sektörü Masaya Yatırıldı”, MOMENT Makina ve Aksamları İhracatçıları Birliği Dergisi, Sayı 32, S.34 -41, Ocak 2011. Akbulut, U., Kıncay, O., “İstanbul Şartlarında Deniz Suyundan Temiz Su Eldesi”, TMMOB Makina Mühendisleri Odası Tesisat Mühendisliği Dergisi, 125, 2011. Başkal, A., Akbulut, U., Kıncay, O., “Toprak Kaynaklı Isı Pompası Destekli Duvardan Isıtma Sistemi”, TMMOB Makina Mühendisleri Odası Tesisat Mühendisliği Dergisi, 125, 2011. Kıncay, O., Karakoç K., “Duvardan Isıtma-Soğutma Sistemleri ve Tasarım İlkeleri”, TMMOB Makina Mühendisleri Odası Tesisat Mühendisliği Dergisi, 124, 25-33, 2011. Kıncay, O., Öztop, M., Ağustos, H., “Buhar Kazan ve Tesisatlarında Korozyon Koruma Programı - Deneysel Uygulama”, TMMOB Makina Mühendisleri Odası Tesisat Mühendisliği Dergisi, 120, 50-60, 2010. Azeloğlu, C.O., Sağırlı, A., “Konteyner krenlerinde depremden kaynaklanan titreşimlerin aktif kontrolü”, Sigma Mühendislik ve Fen Bilimleri Dergisi, (Kabul edildi), Sayı 4/2011. Azeloğlu, C.O., Sağırlı, A., Yazıcı, H., Güçlü, R., “Konteyner krenlerinde depremden kaynaklanan titreşimlerin Bulanık PID kontrolör ile aktif kontrolü”, Fırat Üniversitesi Mühendislik Bilimleri Dergisi, (Kabul edildi), Sayı 2/2012. 4-ULUSAL BİLİMSEL TOPLANTILARDA SUNULAN VE BİLDİRİ KİTABINDA YAYIMLANAN BİLDİRİLER Yazıcı, H., Güçlü, R., Küçükdemiral, İ.B., “Eyleyici Doyumlu Gecikmeye Bağlı H Denetleyici ile Sismik Zorlanma Altındaki Yapısal Sistemlerin Titreşimlerinin Azaltılması", 15. Ulusal Makine Teorisi Sempozyumu UMTS2011, s:505-514, Niğde Üniversitesi, 16-18 Haziran, 2011. Azeloglu, O., Sagirli A., Yazici, H., Guclu, R., “Köprülü Krenlerde Yük Salınımlarının Bulanık Kazanç Ayarlamalı PD Kontrolör ile Önlenmesi’’, 15. Ulusal Makine Teorisi Sempozyumu UMTS2011, s:199-204, Niğde Üniversitesi, 16-18 Haziran, 2011. Akbarov, S.D., İlhan, N., “Zamana göre harmonik değişen yük etkisi altındaki piezoelektrik tabaka ve piezoelektrik yarı sonsuz düzlemden oluşan sistemin dinamik davranışı”, 17. Ulusal Mekanik Kongresi, 05-07 Eylül 2011 Fırat Üniversitesi, Elazığ, (2011) (Konferans Kitabı Basımda) Metin, M., Güçlü R., Keskin G., “Çok Gövdeli Hafif Metro Taşıtlarının Titreşim Analizi”, 15. Ulusal Makine Teorisi Sempozyumu (UMTS 2011), Niğde Üniversitesi, S. 549-558, Niğde, 16-18 Haziran 2011. Metin, M., Güçlü R., Keskin G., “Bir Hafif Metro Aracında Tekerlek-Ray Etkileşiminin Boji Üzerindeki Etkisi”, 15. Ulusal Makine Teorisi Sempozyumu (UMTS 2011), Niğde Üniversitesi, S. 119-128, Niğde, 16-18 Haziran 2011. Metin, M., Özer, A., Güçlü R., Can K., “Bir Hafif Metro Aracına Ait Hava Yayının Matematik Modelinin Çıkartılması”, 15. Ulusal Makine Teorisi Sempozyumu (UMTS 2011), Niğde Üniversitesi, S. 109-118, Niğde, 16-18 Haziran 2011. Metin, M., Duman, F., Keskin, G., Özer, A., Güçlü, R., Can, K., “Bir Hafif Metro Aracına Ait Bojinin Dinamik Davranışının İncelenmesi”, 15. Ulusal Makine Teorisi Sempozyumu (UMTS 2011), Niğde Üniversitesi, S. 459-465, Niğde, 16-18 Haziran 2011. Yumurtacı, Z., Karahan, A.Y., “Pompaj Depolamalı Hidroelektrik Santrallerin Proje Bölgesi Belirleme Kriterleri ve Türkiye İçin İki Örnek Çalışma” , TMMOB Makina Mühendisleri Odası, VI Yeni ve Yenilenebilir enerji Kaynakları Sempozyumu, 21-22 Ekim 2011 Kayseri. Yurci, M. E., “Sac Şekillendirme Kalıpları” / Meslekiçi Eğitim Semineri, Makine Mühendisleri Odası, İkitelli / İSTANBUL, 14 Ekim 2011. Altan, M., Uysal, A., Altan, E., "Nano Partikül Takviyeli Polimer Matrisli Kompozitlerin Testere ile Kesilmesinde İşlem Parametrelerinin Yüzey Pürüzlülüğüne Etkilerinin İncelenmesi", VI.Makine Tasarım ve İmalat Teknolojileri Kongresi Matit 2011, 375-380 Konya, Ekim 2011. Öztürk, S., Altan, E., “Ortogonal Talaş Kaldırmada Takımdaki Kesici Ağız Yuvarlatma Yarıçapının Ölü Bölge ve Kesme Kuvvetlerine Etkisi”, II. Ulusal Talaşlı İmalat Sempozyumu, Konya,214-231, 2010. Arıtaş, A.,Kıyak, M., Seckin, T, Altan E., “Dönen Takma Uçlu Kesici Takımlarla Talaşlı Şekillendirmede İşlem Parametrelerinin Yüzey Pürüzlülüğüne Etkilerinin İncelenmesi”, II. Ulusal Talaşlı İmalat Sempozyumu, Konya,173-183, 2010. Apaydın, V., Uysal, A., Altan, E., “Bir Talaş Kaldırma Modelinin Analizi ve Geliştirilmesi”, Tasarım İmalat ve Analiz Kongresi TİMAK 2010, s. 50-62, Balıkesir, Türkiye, 11-12 Kasım 2010. Doğan, G., Uysal, A., Altan, E., “Elektrolit Jet Kullanılarak Elektrobiriktirme ile Hızlı Prototipleme”, II. Ulusal Talaşlı İmalat Sempozyumu, UTİS 2010, s. 202-214, Konya, Türkiye, 1-2 Ekim 2010. 5- ULUSAL BİLİMSEL TOPLANTILARDA POSTER OLARAK SUNULAN BİLDİRİLER: Metin, M., Gülcü, R., “Raylı Sistem Dinamiği ve Titreşimlerinin Analizi”, Fikirler Pazarı Etkinliği, YTÜ Otağ-ı Hümayun, S.87, İstanbul, 24-25 Mayıs 2011. Bayraktar, M., Gülcü, R., “Raylı Taşıt Dingillerinin Dinamik Analizi”, Fikirler Pazarı Etkinliği, YTÜ Otağ-ı Hümayun, S.87, İstanbul, 24-25 Mayıs 2011. Gülcü, R, Metin, M., Yazıcı, H., Yalçın N. S., “Raylı Sistem Titreşimlerinin Yolcu ve Çevre Üzerindeki Etkilerinin İncelenmesi”, TÜBİTAK Başarı Öyküleri Paylaşım Günleri, Ankara - Rixos Grand Ankara, 20 Nisan 2011. 6- KİTAP: E. Nelson, C. L. Best, W.G. McLean, Theory and Problems of Engineering Mechanics Statics and Dynamics, Schaum’s Outline Series, Fifth Edition, 1998., Çeviren:Ahmet Çelik, Teori ve Problemlerle Mühendislik Mekaniği: Statik ve Dinamik (Ekim 2011), 5. Baskıdan çeviri, 528 Sayfa, ISBN 978-605-395-545-5.,Nobel Yayınevi, Ankara. 7- PATENTLER: Akdoğan, A., “Havalandırma Camı İçin Şekil Hafızalı Yay Takviyeli Bir Piston", T.C.Türk Patent Enstitüsü Faydalı Model Belgesi 2010. 8- ULUSLAR ARASI / ULUSAL SEMPOZYUM VE TOPLANTI FAALİYETLERİ: Yurci, M. E., Kalkan A., Hidrojen Aracı Türkiye Birinciliği Tasarım Ödülü (Madalya), TÜBİTAK Hidromobil Hidromobil Yarışları, Pınarbaşı / İZMİR, 12 Temmuz 2011, Akdoğan, Eker, A., “NanoKon’11”, 1. Ulusal Nanoteknoloji Kongresi, Yıldız Teknik Üniversitesi, 17-18 Haziran, 2011, İstanbul (Kongre Başkanı). Akdoğan, Eker, A., I.Ulusal Ege Kompozit Malzemeler Sempozyumu, 17-19 Kasım 2011, Kompege .(ORGANİZASYON KOMİTE ÜYESİ). Akdoğan, Eker, A., 5th International Quality conference, 20 Mayıs 2011, Sırbistan(ORGANİZASYON KOMİTE ÜYESİ). Akdoğan, Eker, A., 14th International Conference On Advances In Materials & Processing Technologies (AMPT), 13-16 Temmuz, 2011, İstanbul. (ORGANİZASYON KOMİTE ÜYESİ). Çolak, Ö.Ü., 14th International Conference On Advances In Materials & Processing Technologies (AMPT), 13-16 Temmuz, 2011, İstanbul. (ORGANİZASYON KOMİTE ÜYESİ). Küçükyıldırım B., O., “NanoKon’11”, 1. Ulusal Nanoteknoloji Kongresi, Yıldız Teknik Üniversitesi, 17-18 Haziran, 2011, İstanbul (Yürütme Kurulu, Düzenleme Kurulu ve Sekreterya). Yurci, M. E., Efe Y., İstanbul Kimyevi Maddeler ve Mamulleri İhracatçılar Birliği (İKMİB), Kimyevi Maddeler ve Mamulleri Sektöründe 1.Ar-Ge Proje Pazarı Platformu (Kategori: Plastik ve Kauçuk) Katılımı ve Danışmanlar Kurulu Üyeliği, 27-28 Aralık 2010. Kıncay, O., The 6th International Green Energy Conference (IGEC-VI), 5-9 June 2011,Eskisehir, (International Scientific and Advisory Committee). Kıncay, O., TMMOB Makine Mühendisleri Odası, Antalya Şubesi, Ulusal İklimlendirme Kongresi ve Fuarı-İKLİM 2011, 17-20 Kasım 2011, Antalya (Danışmanlar Kurulu Üyesi). Kıncay, O., VI. Yeni ve Yenilenebilir Enerji Kaynakları Sempozyumu, YEKS'2011, 21-22 Ekim 2011, Kayseri (Danışmanlar Kurulu Üyesi). Kıncay, O., TMMOB Makine Mühendisleri Odası, Mersin Şubesi, 5.Güneş Enerjisi Sistemleri Sempozyumu ve Sergisi, 07-08 Ekim 2011, Mersin (Danışmanlar Kurulu Üyesi). YAYIN SAYILARI TABLOSU:
ÖĞRETİM ÜYESİ BAŞINA DÜŞEN YAYIN SAYISI:
PERSONEL DAĞILIMI:
Yüklə 172 Kb. Dostları ilə paylaş:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||